|Cabled:||USB 2.0||WiFi Stick:||802.11b/g/n|
|RAM:||RAM: 512 MB DDR3 RAM||LEDs:||5 Status LEDs|
|Certifications VCI:||FCC, CE, RoHS|
With Xentry, Mercedes-Benz has created an aftersales brand that uses new technologies and solutions to position workshops perfectly for the future: The XENTRY Diagnosis Kit 4, with the XENTRY Diagnosis Pad 2, XENTRY Diagnosis VCI, Xentry License official with one year SCN online support. You’re possible to renew the Xentry official license and SCN online in the following 3 years.
XENTRY Diagnosis Kit 4 consists, as usual, of two components: XENTRY Diagnosis Pad 2 and XENTRY Diagnosis VCI. The device concept is comparable with that of its predecessor XENTRY Diagnosis Kit 3.
XENTRY Diagnosis Kit 4 now offers many more advantages in comparison to XENTRY Diagnosis Kit 3.
Easier to use
The display is a 13.3 inch, multitouch, full HD display with a brightness of 400 nits.
XENTRY Diagnosis Pad 2 comes with four USB type A 3.0 ports and one USB type C port
Located on the front side are two buttons that you can configure individually using ConfigAssist
To provide a more stable WiFi connection to XENTRY Diagnosis VCI, a second WiFi card has been installed, the WiFi stick in the XENTRY Diagnosis Pad 2 has been discontinued.
XENTRY Diagnosis Pad 2 comes with the latest Intel® CoreTM i5 processor (1.6 GHz, turbo up to 3.9 GHz)
The main memory has 16 GB DDR4
1 TB SSD hard drive (with 3000 MB/s read and write speed)
The connection to XENTRY Diagnosis VCI is made using a permanently installed WLAN card.
XENTRY Diagnosis Pad 2 is passively cooled and therefore it does not have a fan.
XENTRY Diagnosis Pad 2 can be run on battery power for up to 8 hours.
|Operating system||Windows 10 IoT LTSC Enterprise|
|Processor||Intel® CoreTM i5|
|Main memory||16 GB DDR4|
|Hard drive||1 TB SSD|
|Display||13.3″, full HD multitouch, brightness 400 nits, resolution 1920 x 1080, antiglare|
|Dimension||Wait approx. 338 x 240 x 33 mm (W x L x H)|
- The practical multiplexer in a compact and sturdy design (no PC core, battery, fan, or display)
- No more diagnosis updates required – only firmware updates on rare occasions
- Can be used for all model series
- Does not require an adapter for an external power supply
|Microprocessor||Intel MX6 Solo|
|RAM||RAM: 512 MB DDR3 RAM|
|ROM||512 MB flash|
|LEDs||5 status LEDs|
|From the vehicle battery via the diagnosis connection cable
or via a connected USB cable.
|8 V to 28 V|
|VCI||FCC, CE, RoHS|